Speed Coat

Speed Coat – Nano-Ceramic Clear

This optically clear finish is perfect for surfaces such as:

•Glass windows (inside and out), solar panels (Maintenance), optical lenses, mirrors (interior or exterior), acrylic windows, aircraft windscreens, smooth plastics, polished metals, solar reflectors, painted, powder-coated, and gel-coat surfaces, making them easier to clean and maintain
Speed Coat helps to protect treated surfaces from UV damage and other environmental corrosion
Speed Coat helps to preserve the original surface finish, leaving coated surfaces super-slick
Speed Coat is great as a maintenance coat over our other products, adding an additional coat of protection with every application.

SECTION 1: PRODUCT AND COMPANY IDENTIFICATION Revision Date: 03 / 05 / 2018
PRODUCT NAME: Speed Coat Nano-Ceramic Sealer
PRODUCT CODES: NAS-3225

Supplier:
Nasco World Wide LLC
1281 North Ocean Drive
Singer Island, FL 33404

EMERGENCY PHONE: 800-255-3924
CHEMTEL PHONE: +01-813-248-0585
CHEMICAL NAME: Silazane Mixture
CHEMICAL FAMILY: Polymeric Resin-Solvent Blend
CHEMICAL FORMULA: Proprietary Blend
PRODUCT USE: Clear Water Proofing and Sealer for woven and fibrous goods
SECTION 1 NOTES:

SECTION 2: COMPOSITION/INFORMATION ON INGREDIENTS

INGREDIENT: Ingredients that are identified as toxic via the SARA guidelines are listed below per section 313 of the 40CFRF372
CAS NO. CHEMICAL NAME CONTENT wt% Lower Upper
9006-65-9 Polysilazane mixture 18% 30%
54-88-5 Tert-Butyl Acetate 25% 40%
64741-66-8 Petroleum Solvent 05% 12%
SECTION 2 NOTES: Ingredients not listed are not listed in the SARA classification and deem proprietary.
SECTION 3: HAZARDS IDENTIFICATION

Hazards classifications
HIMS rating (as packaged)
LABEL STANDARD :
EMERGENCY OVERVIEW: Single Word: Warning
ROUTES OF ENTRY: eyes, skin, inhalation, ingestion
POTENTIAL HEALTH EFFECTS
ACUTE HEALTH HAZARDS:
EYES: May cause irritation
SKIN: May cause skin irritation through absorbsion
INGESTION: Harmful if swallowed
INHALATION: May cause respiratory tract irritation. At higher vapor concentrations, inhalation may affect central nervous system
CHRONIC HEALTH HAZARDS: No known application information at this time.
MEDICAL CONDITIONS GENERALLY AGGRAVATED BY EXPOSURE: No know application information at this time

CARCINOGENICITY OSHA: N/A ACGIH: N/A NTP: N/A IARC: N/A
OTHER: There are no known carcinogenic ingredients present at over 0.1% in this material
SECTION 3 NOTES: Above information based off of standard industrial use of this product. Abnormal use and contact may result in increased damage and irritation to all affected areas.

SECTION 4: FIRST AID MEASURES

EYES: Immediately flush with water for at least 15 minutes. If irritation persist, seek medical attention
SKIN: Wash contact area thoroughly with soap and water. Washing clothing separately from other garments. If irritation persist, stop using garments and seek medical advise.
INGESTION: DO NOT induce vomiting. Seek immediate medical attention.
INHALATION: Remove to fresh air. If breathing is difficult, have trained personnel administer oxygen and seek immediate medical attention.
NOTES TO PHYSICIANS OR FIRST AID PROVIDERS: Administration of absorbents may be of value.
SECTION 4 NOTES: Always wear protective eyeware, gloves and clothing when handling any chemical.

SECTION 5: FIRE-FIGHTING MEASURES

FLAMMABLE LIMITS IN AIR: Not determined at this time.
FLASH POINT: F: 100° C: 38°
METHOD USED: Closed Cup
AUTOIGNITION TEMPERATURE: F: 590° C: 310°
EXTINGUISHING MEDIA: Carbon dioxide, dry chemical powder, extinguishing form media
SPECIAL FIRE FIGHTING PROCEDURES: Evacuate all unnecessary personnel. Shut down all electrical devices in exposed area. Use water to keep adjacent containers cool to prevent pressure build-up. Wear self-contained breathing apparatus and full protective clothing.

UNUSUAL FIRE AND EXPLOSION HAZARDS: Container explosion may occur under fire conditions. Toxic fumes from container may be emitted under fire conditions.
HAZARDOUS DECOMPOSITION PRODUCTS: Chlorine containing gas, Fluorine containing gas, may be discharged upon decomposition.
SECTION 5 NOTES: Avoid static charge build-up. Static charge could ignite heavy vapors.

SECTION 6: ACCIDENTAL RELEASE MEASURES

ACCIDENTAL RELEASE MEASURES: Determine to evacuate or isolate the area according to your local emergency plan. For large spills, supply emergency diking to contain materials. After removal of bulk material, the us of an absorbant is needed for final clean up. Remove waste materials to a location per your local waist management regulations, state or Federal regulations.
SECTION 6 NOTES: Always wear personal protective equipment when handling all types of chemicals and waste products. Refer to section 8 for Personal protective equipment.

SECTION 7: HANDLING AND STORAGE

HANDLING AND STORAGE: Store in cool dry location with adequate ventilation. Do not store in direct sunlight. Keep containers tightly sealed when not in use. Avoid leaving open containers during use.
Store in termperatures between 55°F and 80°F.
OTHER PRECAUTIONS: Always wear protection clothing when handling all chemicals. See section 8 for details.
SECTION 7 NOTES: Do not smoke when handling materials. Keep away from moisture and standing water.

SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION

ENGINEERING CONTROLS: Local and general ventilation is recommended.
RESPIRATORY PROTECTION: Use respiratory protection unless adequate ventilation is in place and has been assessed to provide proper air movement for recommended exposure. Follow OSHA requirements for respirator regulations 29CFR 1910.134.
EYE PROTECTION: Always wear protective eyeware or goggles. Recommended use of full face respirator or large volume handling and spills.
SKIN PROTECTION: Chemical protective gloves is always recommended. Wash exposed skin immediately if contact with chemical occurs.
OTHER PROTECTIVE CLOTHING OR EQUIPMENT: The use of chemical resistant aprons, shoe covers and face shields is recommended for any handling of chemicals.
WORK HYGIENIC PRACTICES: The use of proper cleaning soaps and solutions for all body parts is recommended. Eye wash stations and showers in accordance with OSHA and local safety regulations is advised and in close proximity.
EXPOSURE GUIDELINES: Refer to sections 4, 7, and 8 for contact and exposure recommendations.
SECTION 8 NOTES: Note, all of these precautions are based off of room temperature handling. Elevated temperatures may increase the need for extra care in handling of materials.

SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES

APPEARANCE: Clear
ODOR: Strong solvent to ammonia / napthalenic
PHYSICAL STATE: Liquid
pH AS SUPPLIED: 0.0
pH (Other): N/A
BOILING POINT: F: 282.2° C:139°
MELTING POINT: F: N/A C: N/A
FREEZING POINT: F: -32° C: -36°
SPECIFIC GRAVITY (H2O = 1): 0.889 @ F: 68° C: 20°
EVAPORATION RATE: N/A BASIS (=1):
SOLUBILITY IN WATER: Insoluble
PERCENT SOLIDS BY WEIGHT: <38
VOLATILE ORGANIC COMPOUNDS AS APPLIED (VOC): 560g/L
VOC content less exempt compounds: 560g/L per 40CFR51.100(s).
Total Non-exempt VOC compounds: 0.0 g/L
MOLECULAR WEIGHT: <55ps
VISCOSITY: 12-17 seconds (#2 Zahn Cup) @ F: 77° C: 25°
SECTION 9 NOTES:

SECTION 10: STABILITY AND REACTIVITY

STABILITY: Stable X
INCOMPATIBILITY (MATERIAL TO AVOID): Oxidizers, Isocyanates, water, protic solvents, mineral acids and alkalies.
HAZARDOUS DECOMPOSITION OR BY-PRODUCTS: Chlorine containing gasses, Fluorine containing gasses, Carbon Monoxide,
Carbon Dioxide, and Silicon Dioxide.
HAZARDOUS POLYMERIZATION: Will not occur
CONDITIONS TO AVOID (POLYMERIZATION): N/A
SECTION 10 NOTES: The above criteria may not be all the materials that affect stability, but per testing, the above information is true to the best of our knowledge.
SECTION 11: TOXICOLOGICAL INFORMATION

TOXICOLOGICAL INFORMATION: Not listed as carcinogen by NTP (National Toxicology Program); not regulated as carcinogen by OSHA (Occupational Safety and Health Administration); not evaluated by IARC (International Agency for Research on Cancer)
SECTION 11 NOTES: No human studies have been conducted with this material. The use of recommended protective equipment should reduce or prevent any adverse effects.
SECTION 12: ECOLOGICAL INFORMATION

ECOLOGICAL INFORMATION: This material may be hazardous to aquatic organisms. Avoid release to surface waters and waste treatment systems.
SECTION 12 NOTES:

SECTION 13: DISPOSAL CONSIDERATIONS

WASTE DISPOSAL METHOD: Do not mix this product with aqueous or other protic waste streams. Incinerations of combustible waste materials in a permitted facility in accordance with the local, state, and federal regulations is the recommended disposal method.
RCRA HAZARD CLASS: I / Ignitable
SECTION 13 NOTES: Local and state regulations may exceed federal standards. Always consult your local waste authority for proper disposal requirements.
SECTION 14: TRANSPORT INFORMATION

U.S. DEPARTMENT OF TRANSPORTATION
PROPER SHIPPING NAME: Paint Related Materials
HAZARD CLASS: 3
UN NUMBER: 1263
PACKING GROUP: III
LABEL STATEMENT: Flammable liquid
Revision Date: 05 / 10 / 2014
WATER TRANSPORTATION
PROPER SHIPPING NAME: Paint Related Materials
HAZARD CLASS: 3
UN NUMBER: 1263
PACKING GROUP: III
EmS No.: 30 S-E, F-E
LABEL STATEMENTS: Flammable Liquid
AIR TRANSPORTATION
PROPER SHIPPING NAME: Paint Related Materials
HAZARD CLASS: 3
UN NUMBER: 1263
PACKING GROUP: III
LABEL STATEMENTS: Flammable Liquid
CONSUMER COMMODITY
ID NUMBER: 8000
HAZARD CLASS: 9
LABEL STATEMENT:
LABEL ORM-D Domestic:
SECTION 14 NOTES: Labels to match on both SDS and Packaging as required.

SECTION 15: REGULATORY INFORMATION

U.S. FEDERAL REGULATIONS
TSCA (TOXIC SUBSTANCE CONTROL ACT): All chemical substances in this material are on or exempted from the listing on the
TSCA Inventory of Chemical Substances.
CERCLA (COMPREHENSIVE RESPONSE COMPENSATION, AND LIABILITY ACT): None
SARA TITLE III (SUPERFUND AMENDMENTS AND REAUTHORIZATION ACT): None
311/312 HAZARD CATEGORIES: Acute: NO Chronic: NO Fire: YES Pressure: NO Reactive: NO
313 REPORTABLE INGREDIENTS: Non present or none present in regulated quantities.
STATE REGULATIONS: Exempt list per 40CFR51.100(s).
INTERNATIONAL REGULATIONS: Subject to specific country, province, state or district regulations.
SECTION 15 NOTES: None

SECTION 16: OTHER INFORMATION

OTHER INFORMATION
PREPARATION INFORMATION: This data offered in good faith as typical values and as product specifications.

DISCLAIMER: No warranty, either expressed or implied is herby made. The recommended industrial safety and care practices for safe handling are believed to be generally applicable. Each user should review these recommendation in the specific context of the intended use and determine the suitability of this product for their application.

Technical Data Sheet

NAS-3225 Speed Coat
Nano-Ceramic Clear

Speed Coat is a high performance, single component, ambient air cure thin-film product
Speed Coat creates a covalent bond to the substrate making it an intrinsic part of the material
Speed Coat is an inert (benign) material that, when cured, will not harm marine life or waterways
Speed Coat is an extreme hydrophobic coating with super slick properties, greatly reducing drag

SPEED COAT Properties:

⦁ Color Clear
⦁ Viscosity 16-18 sec. #2 Zahn
⦁ Percent of Solids 19
⦁ Odor (liquid) Slight Solvent
⦁ Odor (cured) None
⦁ V.O.C. Exempt per CFR 51.1 / regulation 8
⦁ RoHS Compliant
⦁ REACH Compliant
⦁ Halogens None
⦁ Thermal Stability (cured) 1200°F + (648.8°C)
⦁ Conical Bond (⅛ inch mandrel) Passed (ASTM D522-93a)*
⦁ Cross cut adhesion 5B (ASTM D3359)*
⦁ Coefficient of Friction 0.03µ (ASTM D2047)
⦁ Specific Gravity 0.889 (ASTM D891-09)
⦁ Pencil Hardness 8h (ASTM D3363)*
⦁ Average applied dry film thickness 2 to 5 microns
⦁ Estimated Coverage Rate(@ 3 microns) 4,200 sq./ft. per gallon
⦁ Transfer to surrounding material Zero (0) transfer of contaminates
⦁ Dry to Touch (time @ room temp) 10 – 25 minutes (average)
(a warmer airflow will reduce time required to reach “Dry to the Touch”)
⦁ Ambient cure (full properties) __________________ 6 hrs
(Exposure to direct sunlight or warmer ambient air will reduce time required to reach a fully cross-linked cure)